The short version
- Subaru AVH holds brake pressure after the vehicle stops, even when the driver releases the brake pedal.
- The system works on flat ground and disengages when the accelerator is pressed.
- AVH is unavailable on manual-transmission Subarus and all BRZ models.
Subaru's Auto Vehicle Hold, or AVH, keeps a vehicle stopped after the driver releases the brake pedal. The system activates when the car comes to a halt and releases the brakes when the accelerator is pressed.
Unlike hill-start assist, AVH works on level roads as well as hills and remains engaged until the driver moves off. It can help during stop-and-go traffic without requiring the driver to keep pressure on the brake pedal.
The feature is available on most Subarus built for model year 2018 and later, including the Solterra electric vehicle. It is not offered on manual-transmission models such as the WRX or on any BRZ coupe.
Drivers must switch AVH on using a console button or touchscreen control, depending on the model. The system deactivates when the driver unbuckles the seat belt, opens the driver's door or turns off the engine, so it must be enabled again after those events.
Subaru's EyeSight driver-assistance package can also control speed in traffic and bring the vehicle to a complete stop through adaptive cruise control, with a tap of the accelerator restarting movement.
How this story was made
Written by the Tach Wire desk from the reporting below, checked against each source and for overlap with their text. Photos: Carscoops.
0 comments
Comments stay in this browser. They are not sent to the newsroom.


